Bonide Stump-Out Granules User Manual download pdf (Page 3)

DIRECTIONS FOR USE

Drill 1-inch holes straight down from top of stump

to depth of about 10 inches. Then into the side

of the stump, about 4 to 5 inches down from the

top, drill a 1-inch wide hole slanting downward

toward the bottom of each vertical hole. The two

hole ends should meet. It is important to drill the

side holes slanting downward so the liquid to be

poured into the holes won’t run out. Also when the

drill holes meet, a natural ventilation is created to

destroy the stump when ignited.

After holes are drilled as directed, follow this

procedure:

Pour 4 - 6 oz of Stump Out into each hole.

1) Fill holes with water.

2) Let stand for 4 - 6 weeks.

After 4 - 6 weeks, fill with kerosene or fuel oil.

4) Let stand until the kerosene or fuel oil is

completely absorbed into the stump.

5) Pour enough kerosene onto the stump to

ignite it.

6) The stump will burn with a smoldering red

glow down to the roots.

6A) As an alternative to kerosene or fuel oil you

may choose to ignite the stump by burning

charcoal briquettes on the top of the stump.

This method also will cause the stump to

smolder down to the roots and leave only ashes.

1 2 3 4

No comments

Bonide Stump-Out Granules User Manual Page 3